Archive: News 

 

ATLAS COPCO POWERROC T45 DRILL

ATLAS COPCO POWERROC T45 DRILL

| Feb 27, 2017 | 0 comments
The PowerROC T45 surface drill has a telescoping boom and drills holes from 3 to 5 inches in diameter. It has an RD 22S hydraulic drill and 370-cfm air compressor. Power Eco allows the operator to select engine speeds—2,000; 2,100; or 2,200 rpm. A 20-foot lead rod plus a three-rod, carousel-style rod-handling system provides on-board
EQUIPMENT, News
POWER PAVER 2400 SERIES CONCRETE PAVERS

POWER PAVER 2400 SERIES CONCRETE PAVERS

| Feb 27, 2017 | 0 comments
The 2400 Series concrete pavers includes the SF-2404 that paves up to 24.6 feet wide. A two-track model, the SF-2402, is also available. The SF-2404 features a telescoping frame that allows simple width adjustments. With a 138:1 track drive gear ratio, the SF-2404 can produce smooth paving even at extremely low speeds. Vibrators can be
EQUIPMENT, News
GENERAC LIGHT TOWERS

GENERAC LIGHT TOWERS

| Feb 23, 2017 | 0 comments
The MLT6SMD, PLT240 LINKTower, and MLT4060MVD light towers have four 240-watt LED lights. The MLT6SMD and MLT4060MVD feature a multispeed EcoSpeed engine that runs at low speed when the LED lights are on, conserving fuel, reducing emissions, and extending run time up to 580 hours on one tank of fuel. The compact design of the
News
WACKER NEUSON 3001 CONCRETE DUMPER

WACKER NEUSON 3001 CONCRETE DUMPER

| Feb 22, 2017 | 0 comments
A concrete edition of its 3-ton dumper, the 3001 Concrete Edition, is outfitted with a specially designed concrete chute that facilitates delivery and placement of concrete. The metal chute is shaped with high side walls to avoid spilling, and the narrow front enables precise pouring into the desired location. The 3001’s bucket has been designed
EQUIPMENT, News
GROVE TMS9000-2 TRUCK CRANE

GROVE TMS9000-2 TRUCK CRANE

| Feb 21, 2017 | 0 comments
The 115-ton-capacity TMS9000-2 truck crane is 800 pounds lighter and has a longer boom than its predecessor, the TMS9000E. The 169-foot, six-section MEGAFORM boom utilizes Grove’s Twin-Lock pinning system and is greaseless. On average, says the manufacturer, load charts with maximum counterweight have improved by approximately 5 percent over its predecessor. A series of cameras
News
DITCH WITCH JT40 DIRECTIONAL DRILL

DITCH WITCH JT40 DIRECTIONAL DRILL

| Feb 21, 2017 | 0 comments
The JT40 horizontal directional drill has a 160-horsepower Cummins QSB4.5 diesel engine. The two-speed, rotational drive system produces 5,500 lb.-ft. of torque, and the unit holds 600 feet of drill pipe. Thrust and pullback force is 40,000 pounds, with a carriage travel speed of 180 fpm. Two 7-inch LED displays show critical machine functions and
EQUIPMENT, News
JOHN DEERE 75G, 85G EXCAVATOR UPDATES

JOHN DEERE 75G, 85G EXCAVATOR UPDATES

| Feb 20, 2017 | 0 comments
The 75G and 85G excavators have been updated with a 57-horsepower Tier 4 diesel that uses a DPF. Hand-controlled auxiliary hydraulics enable the operator to use attachments slowly or fast, depending on the application. Optional rubber track pads or heavy-duty rubber belts let the updated models work on paved surfaces and even cross curbs without
EQUIPMENT, News
OX BODIES TRAILMAKER DUMP BODY

OX BODIES TRAILMAKER DUMP BODY

| Feb 17, 2017 | 0 comments
The TrailMaker dump body is made of carbon steel, which is 35 percent lighter than the company’s standard bodies. It is available in body lengths from 14 to 20 feet, and with capacities from 7.3 to 33 cubic yards. The dump floor has no weld seams to enable payloads to be completely discharged.
News
MINNICH A-1 SERIES CONCRETE DOWEL-PIN DRILLS FEATURE FOUR CONFIGURATIONS

MINNICH A-1 SERIES CONCRETE DOWEL-PIN DRILLS FEATURE FOUR CONFIGURATIONS

| Feb 16, 2017 | 0 comments
Minnich Manufacturing’s A-1 Series concrete dowel-pin drills are single-gang, on-grade models that feature four configurations: horizontally; vertically; into a wall; or 6 inches from a corner—eliminating the need to purchase additional equipment or conversion kits, says the company. The A-1 Series is easily repositioned, says Minnich, with their ability to fit into 48-, 36-, 30-,
News

JOHN DEERE 50G EXCAVATOR

| Feb 16, 2017 | 0 comments
The 36-horsepower 50G excavator features a wide variety of improvements, including a new door design for improved entry and visibility to the left hand side of the machine. The door design also widens the size of the opening for entering the cab. Within the operator station, a new multifunction monitor provides a coolant temperature and
EQUIPMENT, News

About Us

 
In Tractopart we supply quality construction Parts and Heavy Equipment Parts with excellent discount rate for New , Used Rebuilt & Surplus parts for excavators, Wheel loader dozers, and undercarriage for all heavy equipment brands, we are locate in Miami, Fl

Contact Info

 

At Tractopart we focus on providing high quality parts at a great price. Our parts are subjected to rigorous inspection procedures that allow us to ensure product quality.


Phone: (786) 219-1010
Email: sales@tractopart.com
Main Office: 601 N. Federal Hwy, Suite 301, Hallandale Beach, FL 33009