Liebherr at the OTC 2016 in Houston (USA)


Special gearboxes based on series products are developed and produced by Liebherr for various maritime applications.

Special gearboxes based on series products are developed and produced by Liebherr for various maritime applications.

Also this year, the Liebherr Group presents itself with two divisions at the international Offshore Technology Conference (OTC). This is one of the biggest offshore conferences worldwide, which takes place in Houston (USA) from May 2 – 5, 2016.

In the “German Pavilion” on stand 4527, the Liebherr Maritime Cranes division is presenting its comprehensive product-portfolio as well as its competencies as a global market leader in the offshore crane segment. This year’s highlight is the Liebherr crane simulator LiSIM, which simulates the board offshore crane type, BOS 4200. Due to the compact and function-orientated design the BOS cranes are the premium products in the offshore crane segment.

With its crane control by Liebherr the LiSIM allows intensive training for crane drivers. In this way, safety as well as productivity can be further enhanced. Also cost-efficiency can be improved during everyday use. Such training is the basis for all crane operators at Liebherr. The LiSIM simulators are available in various models – from the compact version to the “conventional” cabin solutions and the fully-equipped 40ft container model.

Read more about LiSIM crane simulators

The Components division of the Liebherr Group is also presenting its wide range of products from the areas of gearboxes, large diameter bearings and hydraulics. The high-performance components and system solutions by Liebherr are suitable for a wide range of maritime applications such as cranes, ship propulsion systems and special equipment, for example in pipe-laying ships or jack-up platforms. The range is completed by comprehensive engineering and after-sales services.

One focal point at the exhibition will be the presentation of application-specific solutions for propulsion and lifting systems, for example, the DAT 1000. This is the largest slewing drive that Liebherr has developed and manufactured so far. It has a maximum dynamic output torque of 620,000Nm and finds its specific application in heavy-duty offshore-cranes as a slewing mechanism.

A combination of both ball and roller bearing elements in a slewing ring exemplifies the broad portfolio of large diameter bearings by Liebherr. Moreover, various possibilities for surface protection will be shown at the Components’ stand. For reliable protection against corrosion and increased wear under rough maritime conditions, Liebherr additionally offers special sealing systems.

Recent News

Vermeer WC2500TX Wood Chipper
The WC2500TX tracked wood chipper has a 600-horsepower Tier 4-F engine that enables it to handle whole trees. It comes with either a microchip drum, which produces chip sizes between 1/8 and 5/8 inch, or a macrochip drum, which produces chips between 5/8 and 1 1/4 inches. High-wear areas—such as the drum, discharge chute, cutter
Antofagasta:  punto de encuentro de la industria minera en Exponor 2017
Una vez más, como ha sido cada año por medio desde 1995, los distintos estamentos que componen la industria minera se reúnen en una de las citas más importantes del sector, la Exhibición de Tecnologías e Innovaciones Globales para la Minería, Exponor. Con sede en Antofagasta, durante una semana se convierte en el polo de
Más de 2 mil operadores de equipos pesados participan en tercer concurso organizado por Ferreycorp
ACTUALIDAD EMPRESARIAL. Más de 2 mil operadores de equipos pesados participan en tercer concurso organizado por Ferreycorp.
Link-Belt 750 X4 Excavator
    The 750 X4 excavator has an operating weight of 158,300 pounds, and is powered by a 512-horsepower Isuzu engine. Cycles times have been boosted by 7 percent, and arm digging force by 15 percent, compared to the predecessor. Digging depth is 32 feet 4 inches with 64,970 lb.-ft. of arm force. Bucket digging
La fuerte baja en El Precio del cobre en Chile y menores leyes mineras golpearon al sector.
La compleja situación por la que atravesó la minería en 2016 se dejó sentir en la recaudación fiscal. Es que la caída en el valor del cobre y la disminución de las leyes mineras impactaron fuerte en el royalty, cuya recaudación alcanzó su menor nivel en la historia del impuesto específico que se creó en

About Us

In Tractopart we supply quality construction Parts and Heavy Equipment Parts with excellent discount rate for New , Used Rebuilt & Surplus parts for excavators, Wheel loader dozers, and undercarriage for all heavy equipment brands, we are locate in Miami, Fl

Contact Info


At Tractopart we focus on providing high quality parts at a great price. Our parts are subjected to rigorous inspection procedures that allow us to ensure product quality.

Phone: 786.219.1010
Main Office: 3505 South Ocean Drive #204
Hollywood, FL 33019