GENIE Z-60/37FE ARTICULATED BOOM LIFT WITH HYBRID TECHNOLOGY

The Genie Z-60/37FE is a hybrid articulating boom lift that combines electric power with diesel. Working height is 66 feet, with 36 feet 7 inches of horizontal outreach and 24 feet 3 inches of up-and-over clearance. A standard 5-foot jib has range of motion of 70 degrees up and 65 degrees down, as well as 160 degrees of platform rotation. Lift capacity is 500 pounds, and operating weight is 17,000 pounds.

Full-electric mode provides a full day of operation on a single charge, and hybrid provides more than a week with a single tank of fuel. In hybrid mode, the 24-horsepower Tier 4-Final engine powers the generator that powers four AC drive motors. By disengaging the clutch between the engine and generator, full diesel power can be directed to the drive motors.

When connected to the diesel engine, the generator constantly monitors the battery, keeping it topped off and automatically shutting down to minimize fuel consumption. For extreme conditions or after heavy full-electric operation, the hybrid system can provide a bulk charge (80 percent) within about 4 hours.

The unit has 45 percent gradeability and ground clearance of 1 foot 1 inch. Full-time active oscillating axles increase wheel contact on irregular terrain, and the fully sealed AC motors operate even while submerged under 3 feet of water.

Watch Genie’s walk-around below:

Recent News

 
Vermeer WC2500TX Wood Chipper
The WC2500TX tracked wood chipper has a 600-horsepower Tier 4-F engine that enables it to handle whole trees. It comes with either a microchip drum, which produces chip sizes between 1/8 and 5/8 inch, or a macrochip drum, which produces chips between 5/8 and 1 1/4 inches. High-wear areas—such as the drum, discharge chute, cutter
“TENEMOS TODO MENOS GASOLINA”
www.tractopart.com TENEMOS PIEZAS ORIGINALES, PARTES DE REEMPLAZO, RECONSTRUIDO Y USADOS CON GARANTÍA.
Antofagasta:  punto de encuentro de la industria minera en Exponor 2017
Una vez más, como ha sido cada año por medio desde 1995, los distintos estamentos que componen la industria minera se reúnen en una de las citas más importantes del sector, la Exhibición de Tecnologías e Innovaciones Globales para la Minería, Exponor. Con sede en Antofagasta, durante una semana se convierte en el polo de
Más de 2 mil operadores de equipos pesados participan en tercer concurso organizado por Ferreycorp
ACTUALIDAD EMPRESARIAL. Más de 2 mil operadores de equipos pesados participan en tercer concurso organizado por Ferreycorp.
Link-Belt 750 X4 Excavator
    The 750 X4 excavator has an operating weight of 158,300 pounds, and is powered by a 512-horsepower Isuzu engine. Cycles times have been boosted by 7 percent, and arm digging force by 15 percent, compared to the predecessor. Digging depth is 32 feet 4 inches with 64,970 lb.-ft. of arm force. Bucket digging
La fuerte baja en El Precio del cobre en Chile y menores leyes mineras golpearon al sector.
La compleja situación por la que atravesó la minería en 2016 se dejó sentir en la recaudación fiscal. Es que la caída en el valor del cobre y la disminución de las leyes mineras impactaron fuerte en el royalty, cuya recaudación alcanzó su menor nivel en la historia del impuesto específico que se creó en

About Us

 
In Tractopart we supply quality construction Parts and Heavy Equipment Parts with excellent discount rate for New , Used Rebuilt & Surplus parts for excavators, Wheel loader dozers, and undercarriage for all heavy equipment brands, we are locate in Miami, Fl

Contact Info

 

At Tractopart we focus on providing high quality parts at a great price. Our parts are subjected to rigorous inspection procedures that allow us to ensure product quality.


Phone: 786.219.1010
Email: sales@tractopart.com
Main Office: 3505 South Ocean Drive #204
Hollywood, FL 33019