Ship-to-Shore Cranes

Ship-to-Shore Cranes

Ship-to-Shore Cranes

Terex Port Solutions offers ship-to-shore cranes for loading and unloading of ships of all types and classes. Terex® ship-to-shore cranes offer load capacities of up to 80 t for professional container handling in medium to large sized terminals with high handling rates and speeds alongside ships up to Super-Post-Panamax class.

Terex Port Solutions adapts ship-to-shore cranes to meet individual terminal requirements. In addition to crane geometry, this also includes the power supply, which generally uses an external power source but can alternatively be powered with a diesel-electric generator.

With Terex ship-to-shore cranes, customers benefit from a large number of trolley configurations, including solutions with two trollies. Our ship-to-shore cranes set new standards for the economical and efficient loading and unloading of large ships – a great investment for any terminal to increase productivity.

Performance figures and handling types

  • Container handling from 20’ to 45’ in single, twin and tandem lift operation
  • Ship sizes Feeder, Panamax, post-Panamax and Super-post-Panamax classes
  • Load capacities (using spreaders) from 40 t to 65 t in single and twin lift operation
    from 80 t to 120 t in tandem lift operation

Dimensions

  • Span 16 m to 30.5/35 m
  • Water-side outreach 30 m to 70 m
  • Land-side outreach 10 m to 30 m
  • Lifting height – above quay level 21 m to 51.5 m
  • Lifting height – below quay level 10 m to 20 m
  • Buffer to buffer 27 m (standard)

Speeds

  • Lifting under load from 50 to 90 m/min
  • Lifting without load from 120 to 180 m/min
  • Trolley travel from 150 to 244 m/min
  • Crane travel 45 m/min (standard)

Drive

  • Fully electric with external power supply (standard)
  • Alternative power supply through on-board diesel generator

 

Steel construction variants (boom/trolley girder)

  • Monobox
  • Double Box
  • Lattice

Trolley

  • Rope-drawn, self-propelled or machine house trolley
  • Variant with double trolleys

Special designs

  • “Low profile” ship-to-shore cranes
  • “Goose neck” design
  • Slewing trolley

SOURCE: http://www.terex.com/port-solutions/en/products/ship-to-shore-cranes/index.htm

Recent News

 
Vermeer WC2500TX Wood Chipper
The WC2500TX tracked wood chipper has a 600-horsepower Tier 4-F engine that enables it to handle whole trees. It comes with either a microchip drum, which produces chip sizes between 1/8 and 5/8 inch, or a macrochip drum, which produces chips between 5/8 and 1 1/4 inches. High-wear areas—such as the drum, discharge chute, cutter
“TENEMOS TODO MENOS GASOLINA”
www.tractopart.com TENEMOS PIEZAS ORIGINALES, PARTES DE REEMPLAZO, RECONSTRUIDO Y USADOS CON GARANTÍA.
Antofagasta:  punto de encuentro de la industria minera en Exponor 2017
Una vez más, como ha sido cada año por medio desde 1995, los distintos estamentos que componen la industria minera se reúnen en una de las citas más importantes del sector, la Exhibición de Tecnologías e Innovaciones Globales para la Minería, Exponor. Con sede en Antofagasta, durante una semana se convierte en el polo de
Más de 2 mil operadores de equipos pesados participan en tercer concurso organizado por Ferreycorp
ACTUALIDAD EMPRESARIAL. Más de 2 mil operadores de equipos pesados participan en tercer concurso organizado por Ferreycorp.
Link-Belt 750 X4 Excavator
    The 750 X4 excavator has an operating weight of 158,300 pounds, and is powered by a 512-horsepower Isuzu engine. Cycles times have been boosted by 7 percent, and arm digging force by 15 percent, compared to the predecessor. Digging depth is 32 feet 4 inches with 64,970 lb.-ft. of arm force. Bucket digging
La fuerte baja en El Precio del cobre en Chile y menores leyes mineras golpearon al sector.
La compleja situación por la que atravesó la minería en 2016 se dejó sentir en la recaudación fiscal. Es que la caída en el valor del cobre y la disminución de las leyes mineras impactaron fuerte en el royalty, cuya recaudación alcanzó su menor nivel en la historia del impuesto específico que se creó en

About Us

 
In Tractopart we supply quality construction Parts and Heavy Equipment Parts with excellent discount rate for New , Used Rebuilt & Surplus parts for excavators, Wheel loader dozers, and undercarriage for all heavy equipment brands, we are locate in Miami, Fl

Contact Info

 

At Tractopart we focus on providing high quality parts at a great price. Our parts are subjected to rigorous inspection procedures that allow us to ensure product quality.


Phone: 786.219.1010
Email: sales@tractopart.com
Main Office: 3505 South Ocean Drive #204
Hollywood, FL 33019