Wacker Neuson Medium-Frame Skid Steers, CTLs
The RD Series of rollers includes 15 models: 10 double-drum with either vibration or oscillation drums, and five combination. Operating weights range from 1.8 to 4.5 tons. The smallest model is the RD18, which is available in two drum widths: 31.5 and 39.4 inches. The RD24 is a 2.4-ton model with a drum width of
JLG 4045R 1532R Scissor Lifts
  The 4045R and 1532R scissor lifts have compact dimensions for work in tight areas. The 4045R is 45 inches wide; the 1532R measures 32 inches wide. Maximum lift heights are 40 and 15 feet, respectively. The 1532R has a platform capacity of 600 pounds.   source: https://www.constructionequipment.com/jlg-4045r-1532r-scissor-lifts
New diesel engines: Liebherr is introducing two 6-cylinder in-line engines with displacements of 12 and 13.5 litres
  Liebherr extands its diesel engine portfolio by adding the two new in-line engines to it. With the introduction of the Stage V emission guidelines in Europe in 2019, Liebherr will be launching two new 6-cylinder engines into the market, which will boast optimised combustion. This feature will make them an ideal choice to ensure
CONEXPO 2017: the new Carmix 3500 TC breaks with convention in the self-loading concrete mixer world
    In Germany, on the occasion of its 40th anniversary, once again, the company based in the province of Venice has revolutionised the self-loading concrete mixer world with a model intended to break with convention. For Carmix, the trade show in Las Vegas is an essential event for continuing its path of development in
Sakai SV204, SV414TF, SV544FB Vibratory Rollers
The SV204, SV414TF, and SV544FB single-drum compactors have T4-F engines and are available with either smooth (D) or padfoot (T) drum. The SV204 54-inch roller has maximum weight configurations ranges from 10,220  to 11,980 pounds; load on front axle from 4,795 to 6,560 pounds; with load on rear axle generally 5,425 pounds. Vibratory frequency of
Case CX290D Material Handler, Scrap Loader
Case has introduced two versions of the CX290D: a dedicated material handler and a scrap loader. With an operating weight of 72,100 pounds and lift capacities of up to 24,650 pounds, each purpose-built model is designed specifically for use with grapples, magnets, shears, and other attachments used in the scrap and waste industries, and offers
Grove GRT655 Rough Terrain Crane
The GRT655 RT crane has a 55-ton capacity with a 114.3-foot, four-section, full-power boom. The boom is greaseless. Bottom wear pads support the boom sections and consist of a continuous, flexible sheet of oil-impregnated pad material and are arranged in a segmented style that provides greater support than previous boom designs. Polymer outrigger pads enable
Dressta TD-8S/TD-9S Hydrostatic Dozers
Two hydrostatic compact crawler dozers—the 22,000-pound TD-8S and 24,250-pound TD-9S—are available to the North American market. The new dozers use a dual-path hydrostatic drive system that enables full power to both tracks during gradual turns and counter-rotation pivot turns. The new tractors are powered by electronically controlled, Tier 4-Final, QSF 3.8 Cummins engines that use 
VOLVO L350H WHEEL LOADER
The L350H wheel loader has been redesigned and delivers up to 10 percent better fuel efficiency than its L350F predecessor. It also has a next-generation powertrain hydraulics and new operator environment. The L350H uses a Tier 4-Final D16J engine, designed to deliver high torque at low engine speeds. The new loader also uses a larger
DEERE NAMED ONE OF WORLD’S MOST ETHICAL COMPANIES
Deere & Company is one of the World’s Most Ethical Companies according to the Ethisphere Institute, a global leader in defining and advancing the standards of ethical business practices. The listing by the Ethisphere Institute is in its 11th year and Deere is among only 13 companies that have been named each year to the honor. This
...23456...102030...

Recent News

 
Gradall XL 3300 V Wheeled Excavator
The XL 3300 V is a 4×4 wheeled excavator that can be driven up to 20 mph on and off pavement. It does not require the use of outriggers or grading blade, although both are offered as options. Operating weight is 39,295 pounds, and it has a Volvo Penta Tier 4-F engine that delivers 173
Vermeer WC2500TX Wood Chipper
The WC2500TX tracked wood chipper has a 600-horsepower Tier 4-F engine that enables it to handle whole trees. It comes with either a microchip drum, which produces chip sizes between 1/8 and 5/8 inch, or a macrochip drum, which produces chips between 5/8 and 1 1/4 inches. High-wear areas—such as the drum, discharge chute, cutter
“TENEMOS TODO MENOS GASOLINA”
www.tractopart.com TENEMOS PIEZAS ORIGINALES, PARTES DE REEMPLAZO, RECONSTRUIDO Y USADOS CON GARANTÍA. PARA TUS EQUIPOS, MAQUINARIA AGRÍCOLA Y LO RELACIONADO AL RUBRO. ESTAS EN EL LUGAR INDICADO. #MAQUINARIAS #REPUESTOS #AGRICULTURA#PARTES #MAQUINARIAAGRICOLA #TRACTOR#TRACTORES HELPING YOU TO WORK THE LAND WE HAVE THE GENUINE PARTS, REPLACEMENT,REBUILT AND USED WITH WARRANTY. FOR YOUR AGRICULTURAL MACHINERY AND RELATED TO
Antofagasta:  punto de encuentro de la industria minera en Exponor 2017
Una vez más, como ha sido cada año por medio desde 1995, los distintos estamentos que componen la industria minera se reúnen en una de las citas más importantes del sector, la Exhibición de Tecnologías e Innovaciones Globales para la Minería, Exponor. Con sede en Antofagasta, durante una semana se convierte en el polo de
Más de 2 mil operadores de equipos pesados participan en tercer concurso organizado por Ferreycorp
ACTUALIDAD EMPRESARIAL. Más de 2 mil operadores de equipos pesados participan en tercer concurso organizado por Ferreycorp. Más de 2,100 operadores de maquinaria pesada de las 24 regiones del país ya están inscritos en el tercer Concurso “El Mejor Operador de Equipo Pesado del Perú”, organizado por Ferreycorp junto con sus empresas Ferreyros, Unimaq y Orvisa,
Link-Belt 750 X4 Excavator
    The 750 X4 excavator has an operating weight of 158,300 pounds, and is powered by a 512-horsepower Isuzu engine. Cycles times have been boosted by 7 percent, and arm digging force by 15 percent, compared to the predecessor. Digging depth is 32 feet 4 inches with 64,970 lb.-ft. of arm force. Bucket digging

About Us

 
In Tractopart we supply quality construction Parts and Heavy Equipment Parts with excellent discount rate for New , Used Rebuilt & Surplus parts for excavators, Wheel loader dozers, and undercarriage for all heavy equipment brands, we are locate in Miami, Fl

Extra 5% cut

 

Contact Info

 

At Tractopart we focus on providing high quality parts at a great price. Our parts are subjected to rigorous inspection procedures that allow us to ensure product quality.


Phone: 786.219.1010 / 786.394.3425 Venezuela: +58 (241) 774.2216
Bogotá: +57 (1) 50.85 125
Email: sales@tractopart.com
Main Office: 3505 South Ocean Drive Hollywood, FL 33019